BlueOS Documentation
Usage Integrations Hardware- Flight Controller Board
- Onboard (Companion) Computer
- Control Station (Topside) Computer
- Joystick / Gamepad
- Camera
- Electronic Speed Controllers (ESCs)
- Thrusters
- Power Sensor / Battery Monitor
- Power Supply / Battery
- Tether
- Leak Sensors
- Sonars
- Positioning Sensors (GPS / DVL)
- Other Sensors (Temperature, Salinity, Thickness, etc)
- Servos
- Ethernet (Network) Switch
- Electrical Switch
- Electronic Switches (Relays and MOSFETs)
- Grippers and Manipulators
- Indicator Lights
- Acoustic Modems
Servos
Servos are a useful addition to any underwater vehicle build where a component needs to be actuated or rotated. Normal servos can be installed inside the watertight enclosures to rotate things such as cameras. Depth rated servos can be used outside of enclosures.
Up to three servos can be operated via joystick button functions when connected to the appropriate signal output.
Most autopilots cannot provide power to the servos so a 5V power supply will need to be connected to the output signal rail.
#Supported Servos
ArduSub supports either analog or digital PWM controlled servos. The following have been tested:
- Hitec HS-5055MG Servo (used in the Blue Robotics Camera Tilt System)
- Blue Trail Engineering Waterproof Servo SER-110X
Powered by Zola and Bluetheme Documentation under CC BY-NC-SA 4.0
Sponsored by Blue Robotics
Code under
AGPLv3
/
BlueOS Custom