BlueOS Documentation
Usage Integrations Hardware- Flight Controller Board
- Onboard (Companion) Computer
- Control Station (Topside) Computer
- Joystick / Gamepad
- Camera
- Electronic Speed Controllers (ESCs)
- Thrusters
- Power Sensor / Battery Monitor
- Power Supply / Battery
- Tether
- Leak Sensors
- Sonars
- Positioning Sensors (GPS / DVL)
- Other Sensors (Temperature, Salinity, Thickness, etc)
- Servos
- Ethernet (Network) Switch
- Electrical Switch
- Electronic Switches (Relays and MOSFETs)
- Grippers and Manipulators
- Indicator Lights
- Acoustic Modems
Electronic Speed Controllers (ESCs)
ArduSub is designed to work with brushless and brushed Electronic Speed Controllers (ESCs) to control motors and thrusters. Different motor types require different ESCs, so the ESCs must match the motor type they are being used to control.
ArduPilot does not support controlling both brushed and brushless motors at the same time.
The minimum requirements for an ESC of either type are:
- Bi-directional control - they operate in forward and reverse (most ESCs for UAVs and hobby drones only operate in one direction)
- Controlled by a PWM input where:
- 1900 us is full forward
- 1500 us is stopped
- 1100 us is full reverse
#Brushless ESCs
The following brushless ESCs are supported for use with ArduSub:
There is a comparison of properties in the Blue Robotics Technical Reference.
#Brushed ESCs
No brushed ESCs have been reported to be used with ArduSub, but here is the reference documentation from ArduPilot:
Powered by Zola and Bluetheme Documentation under CC BY-NC-SA 4.0
Sponsored by Blue Robotics
Code under
AGPLv3
/
BlueOS Custom